ELECTRONIC STATIC KWH Meters

Approx. Rs 23,600 / PieceGet Latest Price

Additional Information:

Approx. Rs 3,422 / PieceGet Latest Price

Additional Information:

Approx. Rs 3,422 / PieceGet Latest Price

Additional Information:

Approx. Rs 1,711 / PieceGet Latest Price

Additional Information:

Approx. Rs 1,400 / PieceGet Latest Price

Approx. Rs 5,900 / PieceGet Latest Price

Additional Information:

Approx. Rs 1,500 / PieceGet Latest Price

Additional Information:

Approx. Rs 5,500 / PieceGet Latest Price

Net metering is an agreement that allows the solar PV system owner to sell excess solar energy to the utility company or buy deficit energy from the utility company using a meter to track this energy exchange.

Genus being the largest manufacturer of electricity meters, offers the grid-tied rooftop systems with net meters. The loads can run on solar power as long as there is sufficient energy available from the sun during the day. Any deficit is taken care by the main utility supply. However, if the solar energy production is in excess as compared to the load requirement at that moment, the excess energy can be either stored in the batteries (if available) or can be transferred back to the utility grid. This difference of energy is tracked and maintained in Genus Net Meter.

• Import-Export Electricity Measurement at interconnection points
• Suitable for both On-Grid & Off-Grid Interconnection points
• Net Electricity Measurement for Roof Top Solar, Wind & Other Renewable power generation sources

• Single Metering unit for Bi-directional Energy Measurement
• Separate Energy Registration for Power injection & drawl from/to Grid
• Net Energy calculation for Power credits
• Designed & Developed, as per CEA regulation 2006
• Accurate Energy Measurement, 1.0 accuracy class

• AMR compatible unit for local and remote communication
• Internal Battery Back up to Display Meter Data in Power off event
• Both kW & kVA measurement for Import & Export mode
• History of Energy Consumption for Billing months
• ToU wise, Daily & every 30min load profile Data availability
• Configurability feature for ToU, Demand Integration (15/30/60Min) period etc
• Self Diagnostic facility, Anti-Tamper/Event logging
• “Genus-Urja”, Base Computer Station Software, for user friendly Meter data display in Matrix & Graphical format
• MIS report generation through BCS

Additional Information:

Approx. Rs 1,350 / PieceGet Latest Price

Additional Information:

Approx. Rs 40,000 / PieceGet Latest Price

• Distribution transformer (DT) metering
• Energy audit and system analysis
• Low-voltage high-current commercial metering

• Better overall system accuracy than a traditional meter and associated CTs
• Easier to install than traditional DT metering
• Reduced cost for equipment, installation and maintenance by eliminating the need for external CTs, meter enclosure and accessories
• Increased reliability and tamper resistance compared with traditional installations
• Easy diagnosis of installation faults via a complete set of instantaneous electrical parameters
• Data transfer push and pull facilitate to easy integration rdwith 3rd party DAS/Head-end system

• True four-quadrant metering
• Programmable time-of-use (TOU) tariffs and maximum demands (MD)
• Thread-through arrangement: field cable passes directly through the meter
• Large backlit LCD with phase indicators and parameter identification
• Display scroll lock for continuous display of desired parameters
• Logging of billing data and multi-parameter load survey
• Interoperable DLMS protocol for meter reading and option of reading through remote using 4G/GPRS network
• Meter reading in absence of mains using internal battery
• Distribution transformer metering events support, viz. high and low voltage, under and overload
• Advanced event detection features for voltage, current and magnetic influences

Approx. Rs 1,416 / PieceGet Latest Price

Additional Information:

Approx. Rs 1,711 / PieceGet Latest Price

Additional Information:

Approx. Rs 3,422 / PieceGet Latest Price

Approx. Rs 1,711 / PieceGet Latest Price

• Rating 5-30A Digital Display Single Phase meter. Energy Meter based on IEEE 802.15.4G.Ability for network to dynamically change channel if interference arises for long term.
• This is mostly used as RF Meter to get the reading. Centralised data collection system.Each meter aids transfer of data for self as well as neighbouring Meters.Automated device address management.
• This provides the accurate reading. The error margin is less than 0.01%, Best in its class. Support for bidirectional exchanges. Network scalability feature simplifies network development even allowing multiple networks to co-exist. Wireless Commissioning. Software solutions for communication also available
• This is used as MSEDCL Meter. Group addressing. Efficient in terms of power consumption versus range performance. Reliable, Economical and interoperable solution for utilities.
• APPLICATION: Used as Wireless Communication for Low Power Radio Frequency.Specifications for this item

  Brand Name	HPL
  Ean	0998364487219
  Finish Type	Polished
  Included Components	Case
  Item Weight	700 grams
  Material	Die Cast
  Model Number	SPPB00111000CN0
  Number of Items	1
  Part Number	SPPB113
  Power Source Type	AC
  Size	Medium
  Special Features	Reading Accuracy at minimal Percentage in its class.
  UPC	998364487219

Approx. Rs 300 / PieceGet Latest Price

Additional Information:

Approx. Rs 5,500 / PieceGet Latest Price

Additional Information:

Approx. Rs 1,800 / PieceGet Latest Price

It is a kind of electric measure indicator with the direct effect of imitative display. The panel meter is ideally suitable for AC & DC output and input distribution circuit, power plant console cabinet, power operating board and different apparatus. Further, it is widely used to measure DC current, voltage & AC current, voltage, frequency and phase power. These can measure the current, voltage frequency, active and reactive power, power factor in assembly equipment electrical cubes, boxes and other measurement system in industrial enterprise, chemical, metallurgy and electric textile. The series meters can be divided into two types of construction, CNDF series, and ampere. Our voltage meters are electromagnetic series adopting repulsive construction. The construction is made of electromagnetic measurement mechanism and electronic transfer .automobile, generator, handling of foul water, fire control, safe control and teaching instrument.

The specifications are as follow:

• Accuracy of current and voltage: class 1.5

• Accuracy of frequency, power and power factor: class 2.5

• Accuracy of CNDF 48-A.V: class 2.5

• Working temperature-~+40C

• Relative atmosphere humidity 85%

• A few sands are allowable in the air

• Outside mechanical applied force withstand: common type

• Insulation strength Arcsine 50Hz, 2kV/2min

• There should be no feed-through and flashover indications on the meter after the voltage tests

• Working position: It should be mounted vertically to operate

Additional Information: